Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement - Left Side.
3. Support the transmission with a transmission jack.

1

Transmission Mount Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Transmission Mount Nut (Qty: 2)

Tighten
50 N·m (37 lb ft)

3

Transmission Mount

Procedure

Using the transmission jack, lift the transmission just enough to gain clearance to remove the transmission mount from between the frame bracket and the transmission mount bracket.