GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Suzuki 🢒 2009 🢒 XL-7 FWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Coolant Fan Motor Replacement

Removal Procedure

    Object Number: 1284988 Size: SH
  1. Remove the cooling fan and shroud from the vehicle. Refer to Cooling Fan and Shroud Replacement.

    2. Note: The fan and motor assembly is a balanced assembly. Be sure to mark the relationship of the fan to the motor shaft to ensure the balance is maintained.

  2. Place a scribe mark (3) on the fan (2) hub and the motor shaft (1).

    3. Object Number: 1284989 Size: SH
  3. Remove the fan retaining clip (1) from the motor shaft (2).
  4. Discard fan retaining clip (1).

    5. Object Number: 1284991 Size: SH
  5. Remove the fan (1) from the motor (2).

    6. Object Number: 1284993 Size: SH
  6. Remove the fan motor screws from the fan shroud.
  7. Remove the fan motor from the fan shroud.

Installation Procedure

    Object Number: 1284993 Size: SH
  1. Install the fan motor to the fan shroud.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the fan motor screws to the fan shroud and tighten to 8 N·m (71 lb in).

    3. Object Number: 1284991 Size: SH
  3. Install the fan (1) to the motor (2).

    4. Object Number: 1284988 Size: SH
  4. Align the scribe marks (3) previously made on the fan (2) hub and the motor shaft (1).

    5. Object Number: 1284989 Size: SH

    Note: Ensure that the scribe marks remain aligned during fan retaining clip (1) installation.

  5. Install a new fan retaining clip (1) to the motor shaft (2). Ensure the retaining clip (1) is fully seated.
  6. Install the cooling fan and shroud to the vehicle. Refer to Cooling Fan and Shroud Replacement.