Preliminary Procedure

Open the liftgate in order to access the tail lamp access hole covers and screws.

1

Tail Lamp Access Hole Cover Assembly (Qty: 2)

2

Tail Lamp Screws (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
Tighten the screws in the sequence shown to 2.5 N·m (22 lb in)

3

Tail Lamp Assembly

Tip
Pull the lamp assembly rearward, disengage the locator pins and disconnect the electrical connector.

4

Tail Lamp Locator Pins (Qty: 2)

Tip
Use palm pressure to engage the locator pins to quarter panel upon re-installation of the tail lamp.

5

Rear Quarter Panel Nuts (Qty: 2)