GM Service Manual Online
For 1990-2009 cars only

Object Number: 1800135  Size: SF

Callout

Component Name

Preliminary Procedure

Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

1

Windshield Washer System Module Assembly Bolts (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
Tighten the bolts in the mandatory sequence as shown to 12 N·m (9 lb ft)

2

Windshield Washer System Module Assembly

Tip

    • Raise the module from the plenum and disconnect the electrical connector from the wiper motor.
    • Re-connect the electrical connector prior to the installation of the wiper washer module back into the plenum.

3

Windshield Washer Module Assembly Harness

4

Windshield Washer Module Assembly Harness Rosebud

Tip
Ensure the rosebud is fastened to the plenum flange to ensure the harness is secure.