GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Suzuki 🢒 2009 🢒 XL-7 FWD 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the front tire and wheel. Refer to Tire and Wheel Removal and Installation.

    3. Object Number: 1826006 Size: SH
  3. Remove the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement.
  4. Remove the outer tie rod ends from the knuckle. Refer to Steering Linkage Outer Tie Rod Replacement.
  5. Rotate the left and right knuckle all the way forward.
  6. Remove the stabilizer shaft clamp bolts.

    7. Object Number: 1826025 Size: SH
  7. Remove the stabilizer shaft clamp and bushings.

    8. Object Number: 1885172 Size: MH
  8. Maneuver the stabilizer shaft (1) so that it is positioned between the wheel drive shaft (3) and the front lower control arm (2).

    9. Note: Take care as not to catch the transmission shift cable or the left wheel house plastic trim when removing the stabilizer shaft.

    Note: It may be necessary to rotate the stabilizer shaft 180 degrees while removing it from the vehicle.

  9. Remove the stabilizer shaft from the vehicle through the left wheel opening.

Installation Procedure

    Object Number: 1885172 Size: MH

    Note: Take care as not to catch the transmission shift cable or the left wheel house plastic trim when removing the stabilizer shaft.

  1. Position the stabilizer shaft (1) so that it is positioned between the wheel drive shaft (3) and the front lower control arm (2).
  2. Maneuver the stabilizer shaft until it is properly position on the frame.

    3. Object Number: 1826025 Size: SH
  3. Install the stabilizer shaft bushing and clamps.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the stabilizer shaft clamp retaining bolts and tighten the bolts to 50 N·m (37 lb ft).

    5. Object Number: 1826006 Size: SH
  5. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement.
  6. Install the outer tie rod ends. Refer to Steering Linkage Outer Tie Rod Replacement.
  7. Install the tires and wheels. Refer to Tire and Wheel Removal and Installation.
  8. Remove the support.
  9. Lower the vehicle.