Front Side Door Window Regulator Motor Replacement for Suzuki XL-7 FWD 2009
Removal Procedure
- Remove the front side door trim panel. Refer to
Front Side Door Trim Panel Replacement .
- Remove the front side water deflector. Refer to
Front Side Door Water Deflector Replacement .
- Disconnect the electrical connector from the front side door window regulator motor.
- Remove the front side window from the window regulator.
| 4.2. | Tape the window into position. |
- Remove the front side door window regulator motor screws.
Installation Procedure
- Align the front side door window regulator motor to the window regulator.
Caution: Refer to Fastener Caution in the Preface section.
- Install the front side door window regulator motor to regulator bolts .
Tighten the front door window regulator motor to door bolts to
8 N·m (71 lb in)
.
- Connect the electrical connector to the front side door window regulator motor.
- Install the front side door water deflector. Refer to
Front Side Door Water Deflector Replacement .
- Install the front side door trim panel. Refer to
Front Side Door Trim Panel Replacement .