GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1378614  Size: SH
  1. Remove the door handle bolt cap.
  2. Remove the door handle screw through the door shut face.

  3. Object Number: 1378607  Size: SH
  4. Remove the door handle cap.
  5. Remove the door handle by sliding rearward and pulling away from the door.
  6. Remove the gasket, if necessary.

Installation Procedure


    Object Number: 1378607  Size: SH
  1. Install the gasket, if necessary.
  2. Install the handle by placing into position and sliding rearward ensuring to engage the outside handle lever.
  3. Install the door handle cap.
  4. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1378614  Size: SH
  5. Install the door handle screw through door shut face.
  6. Tighten the screw to 8 N·m (71 lb in) .

  7. Install the door handle bolt cap.