Rear Bumper Lower Fascia Replacement. Suzuki XL-7 FWD 2009

For 1990-2009 cars only

Makes 🢒 Suzuki 🢒 2009 🢒 XL-7 FWD 🢒 Body Repair 🢒 Bumpers and Fascias 🢒 Rear Bumper Lower Fascia Replacement

Callout

Component Name

Preliminary Procedure

Remove the plastic retainers and the bolts securing the rear wheelhouse liner panels to the fascia assembly. Refer to Rear Wheelhouse Panel Liner Replacement .

Rear Bumper Lower Fascia Plastic Retainer (Qty: 4)

Rear Bumper Lower Fascia Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Remove the plastic covers to access the bolts.

Tighten
6 N·m (53 lb in)

Rear Bumper Lower Fascia

Tip

•	Each side of the rear bumper upper fascia is secured to the quarter panel with two plastic retainers and an integral clip. For an image of these pieces refer to Rear Bumper Bracket Replacement .

•	Do not jerk on the rear fascia to remove or you may break the retainers on the rear fascia brackets.