Preliminary Procedures

1. Remove the right front tire/wheel assembly. Refer to Tire and Wheel Removal and Installation.
2. Place drain pans under the vehicle as needed.

1

Power Steering Fluid Reservoir Outlet Hose Clamp

2

Power Steering Fluid Reservoir Outlet Hose

3

Power Steering Pump Inlet Pipe Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
Tighten to 8 N·m (71 lb in).

4

Power Steering Pump Inlet Pipe Seal

Tip
Discard the O-ring seal and use a NEW O-ring seal prior to installation.

5

Power Steering Pump Inlet Pipe

Procedure

Fill and bleed the power steering system. Refer to Power Steering System Bleeding.

Tip
Clean any excess power steering fluid from the vehicle.