GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Suzuki
🢒
2009
🢒
XL-7 FWD
🢒
HVAC
🢒
Heating, Ventilation, and Air Conditioning
🢒 Battery Replacement
Removal Procedure
Remove the powertrain control module (PCM) (2) from the battery box cover (1) and relocate to the side.
Release the locking tab (1) on the side of the battery box.
Release the alignment tabs (2) on the front of the battery box.
Remove the battery box lid (3).
Disconnect the positive and negative battery cables. Refer to
Battery Negative Cable Disconnection and Connection
.
Remove the battery hold down bolt (5), battery hold down (4), and washer (3).
Remove the battery (1).
Installation Procedure
Position the battery (1) in the battery box (2).
Install the washer (3) and battery hold down (4).
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the hold down bolt (5) and tighten to
15 N·m (11 lb ft)
.
Install the positive and negative battery cables. Refer to
Battery Negative Cable Disconnection and Connection
.
Position the battery lid (3) so that the alignment tabs (2) are in position.
Lock the locking tabs (1) on the side of the battery box.
Install the PCM (2) on the battery box cover (1).