Preliminary Procedure

1. Remove the driver side wheelhouse liner in order to access the washer container fasteners. Refer to Front Wheelhouse Liner Replacement.
2. Drain the washer solvent into clean container.
3. Remove the filler neck retainer from the radiator support.

1

Windshield Washer Container Screws (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
Tighten the screws to 2.5 N·m (22 lb in)

2

Windshield Washer Solvent Container

Tip
Ensure the grommet is attached to the bottom of the container upon re-assembly into the engine compartment.

3

Windshield Washer Solvent Hose

Tip
Disconnect the washer solvent hose from the washer pump and container.