1

Shift Control Knob Boot

Procedure

1. Depress the sides of the boot in order to release the boot from the instrument panel (I/P) lower brace bezel.
2. Lift the boot up in order to access the shift control knob screw.

2

Shift Control Knob Screw

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Loosen the shift control knob screw approximately 4-5 turns. It is not necessary to fully remove the screw from the shift control knob.

Tighten
1.5 N·m (13 lb in).

3

Shift Control Knob

Procedure

Remove the shift control boot if replacing the knob. Refer to Transmission Control Lever Boot Replacement.