Important:
| • | Many internal engine components will develop specific wear patterns on
their friction surfaces. |
| • | When disassembling the engine, internal components MUST be separated,
marked, or organized in such a way as to make sure installation to their original
location and position. |
Separate, mark, or organize the following components:
| • | Piston and the piston pin |
| • | Piston to the specific cylinder bore |
| • | Piston rings to the piston |
| • | Connecting rod location and orientation to the crankshaft journal |
| • | Connecting rod to the bearing cap |
| | A paint stick or etching/engraving
type tool are recommended. Stamping the connecting rod or cap near the bearing bore
may affect component geometry. |
| • | Crankshaft main and connecting rod bearings |
| • | Camshaft and valve lifters |
| • | Valve lifters, lifter guides, pushrods and rocker arm assemblies |
| • | Valve to the valve guide |
| • | Valve spring to the cylinder head location |
| • | Engine block main bearing cap location and direction |
| • | Oil pump drive and driven gears |
