Wipers Always On. Buick Skylark 1998

For 1990-2009 cars only

Makes 🢒 Buick 🢒 1998 🢒 Skylark 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Wipers Always On

Step	Action	Value(s)	Yes	No
1	Did you perform the Wiper/Washer System Check?	--	Go to Step 2	Go to Wiper/Washer System Check or Wiper/Washer System Check
2	Disconnect the wiper motor connector C1. Turn the ignition switch to RUN. Turn the wiper switch to OFF. Measure the voltage from connector C1, terminal B, to ground using a J 39200. Is the measurement within the specified values?	10.5-15 V	Go to Step 4	Go to Step 3
3	Disconnect the wiper motor connector C2. Measure the voltage from connector C2, terminal A, to ground using a J 39200. Is the measurement within the specified values?	10.5-15 V	Go to Step 7	Go to Step 10
4	Test for a short to B+ in CKT 92. Does a short exist?	--	Go to Step 5	Go to Step 6
5	Repair the short to B+ in CKT 92. Did you complete the repair?	--	Go to Wiper/Washer System Check or Wiper/Washer System Check	--
6	Replace the wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement - On Vehicle . Did you complete the repair?	--	Go to Wiper/Washer System Check or Wiper/Washer System Check	--
7	Test for a short to B+ in CKT 196. Does a short exist?	--	Go to Step 8	Go to Step 9
8	Repair the short to B+ in CKT 196. Did you complete the repair?	--	Go to Wiper/Washer System Check or Wiper/Washer System Check	--
9	Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Did you complete the repair?	--	Go to Wiper/Washer System Check or Wiper/Washer System Check	--
10	Test for a short to B+ in CKT 92. Does a short exist?	--	Go to Step 11	Go to Step 12
11	Repair the short to B+ in CKT 92. Did you complete the repair?	--	Go to Wiper/Washer System Check or Wiper/Washer System Check	--
12	Replace the wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement - On Vehicle . Did you complete the repair?	--	Go to Wiper/Washer System Check or Wiper/Washer System Check	--