Test Description
The number(s) below refer to the Step number(s) on the diagnostic table.
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
The symptom list in Symptoms will determine the correct diagnostic procedure to use.
-
The presence of DTCs which begin with "U" indicate some other module is not communicating.
Step | Action | Yes | No |
|---|---|---|---|
1 | Install a Scan tool. Does the scan tool power up? | Go to Step 2 | Go to Scan Tool Does Not Power Up in Data Link Communications |
Does the scan tool communicate with the tilt/telescoping steering column control module? | Go to Step 4 | Go to Step 3 | |
3 | Attempt to operate the tilt/telescoping steering column In/Out/Up/Down functions. Does the column move? | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | |
Select the tilt/telescoping steering column control module display DTC function on the scan tool. Does the scan tool display any DTCs? | Go to Step 5 | Go to Symptoms | |
Does the scan tool display any DTCs which begin with a "U"? | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | Go to Step 6 | |
6 | Does the scan tool display DTC B1007 or B1009? | Go to Diagnostic Trouble Code (DTC) List/Type in Body Control System | Go to Step 7 |
7 | Does the scan tool display DTC B1327? | Go to Diagnostic Trouble Code (DTC) List/Type in Engine Electrical |
