GM Service Manual Online
For 1990-2009 cars only

Lumbar Support Does Not Move In or Out w/o A45

Step

Action

Value(s)

Yes

No

SCHEMATIC REFERENCE: Lumbar Support Schematics

1

Did you review the power seat system operation and perform the necessary inspection?

--

Go to Step  2

Go to Symptoms

2

  1. Probe the lumbar backward control circuit of the lumbar switch with a test lamp that is connected to a good ground.
  2. Operate the lumbar BACKWARD switch.

Does the test lamp illuminate?

--

Go to Step  3

Go to Step 5

3

  1. Probe the lumbar forward control circuit of the lumbar switch with a test lamp that is connected to a good ground.
  2. Operate the lumbar FORWARD switch.

Does the test lamp illuminate?

--

Go to Step 4

Go to Step 5

4

  1. Disconnect the lumbar horizontal motor harness connector.
  2. Connect a test lamp between the forward control circuit of the lumbar horizontal motor and the backward control circuit of the lumbar horizontal motor.
  3. Operate the lumbar switch in the FORWARD and BACKWARD directions.

Does the test lamp illuminate in both directions?

--

Go to Step 6

Go to Step 7

5

Inspect for poor connections at the harness connector of the lumbar switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 10

Go to Step 8

6

Inspect for poor connections at the harness connector of the lumbar horizontal motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 10

Go to Step 9

7

Repair the open in the lumbar forward/backward control circuits of the lumbar horizontal motor. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Step 10

--

8

Replace the lumbar switch. Refer to Power Seat Switch Replacement .

Did you complete the replacement?

--

Go to Step 10

--

9

Replace the lumbar horizontal motor. Refer to Front Seat Lumbar Support Replacement .

Did you complete the replacement?

--

Go to Step 10

--

10

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2

Lumbar Support Does Not Move In or Out with A45

Step

Action

Value(s)

Yes

No

SCHEMATIC REFERENCE: Lumbar Support Schematics

1

Did you perform the Diagnostic System Check-Power Seat Systems?

--

Go to Step 2

Go to Diagnostic System Check - Power Seat Systems

2

  1. Install a scan tool.
  2. Turn ON the ignition, with the engine OFF.
  3. With a scan tool, observe the Seat Lumbar Forward parameter in the Memory Seat Module data list.
  4. Operate the lumbar FORWARD switch.

Does the Seat Lumbar Forward parameter change state?

--

Go to Step 3

Go to Step 5

3

  1. With a scan tool, observe the Seat Lumbar Backward parameter.
  2. Operate the lumbar BACKWARD switch.

Does the Seat Lumbar Backward parameter change state?

--

Go to Step 4

Go to Step 6

4

  1. Disconnect the lumbar horizontal motor harness connector.
  2. Connect a test lamp between the forward control circuit of the lumbar horizontal motor and the backward control circuit of the lumbar horizontal motor.
  3. Operate the lumbar switch in the FORWARD and BACKWARD directions.

Did the test lamp illuminate in both directions?

--

Go to Step 13

Go to Step 7

5

  1. Disconnect the lumbar switch harness connector.
  2. Connect a 3 amp fused jumper wire from battery positive voltage (B+) to the lumbar forward input circuit of the switch connector.
  3. With a scan tool, observe the Seat Lumbar Forward parameter.

Does the Seat Lumbar Forward parameter change state?

--

Go to Step 12

Go to Step 9

6

  1. Disconnect the lumbar switch harness connector.
  2. Connect a 3 amp fused jumper wire from battery positive voltage (B+) to the lumbar backward input circuit of the switch connector.
  3. With a scan tool, observe the Seat Lumbar Backward parameter.

Does the Seat Lumbar Backward parameter change state?

--

Go to Step 12

Go to Step 10

7

Test the lumbar forward motor control circuit between the memory seat module (MSM) and the lumbar horizontal motor for a short to ground or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 8

8

Test the lumbar backward motor control circuit between the memory seat module (MSM) and the lumbar horizontal motor for a short to ground or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 11

9

Test the lumbar forward input circuit between the lumbar switch and the memory seat module for a short to ground or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 11

10

Test the lumbar backward input circuit between the lumbar switch and the memory seat module for a short to ground or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 11

11

Inspect for poor connections at the harness connector of the memory seat module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 14

12

Inspect for poor connections at the harness connector of the lumbar switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 15

13

Inspect for poor connections at the harness connector of the lumbar horizontal motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 16

14

Replace the memory seat module (MSM). Refer to Memory Seat Control Module Replacement .

Did you complete the replacement?

--

Go to Step 17

--

15

Replace the seat lumbar switch. Refer to Power Seat Switch Replacement .

Did you complete the replacement?

--

Go to Step 17

--

16

Replace the seat lumbar horizontal motor. Refer to Front Seat Lumbar Support Replacement .

Did you complete the replacement?

--

Go to Step 17

--

17

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2