1

Seat Belt Chime

1. Close the driver's door.
2. Insert the key into the ignition.

Do not move the ignition switch from the LOCK position.

3. Leave the driver's seat belt unbuckled.
4. Turn the ignition switch to the RUN position.

The chime will sound 50 beats per minute for 5-10 seconds.

2

Seat Belt Chime

1. Close the driver's door.
2. Insert the key into the ignition.

Do not move the ignition switch from the LOCK position.

3. Buckle the driver's seat belt.
4. Turn the ignition switch to the RUN position.

No chime will sound.

3

Key In Chime

1. Close the driver's door.
2. Insert the key into the ignition.

Do not move the ignition switch from the LOCK position.

3. Open the driver's door.

The chime will sound 100 beats per minute while the following conditions exist:

4

Key In Chime

1. Close the driver's door.
2. Insert the key into the ignition.

Do not move the ignition switch from the LOCK position.

3. Remove the key from the ignition.

The chime stops sounding when the key is removed from the ignition.

5

Lights On Chime

1. Close the driver's door.
2. Turn the ignition switch to the LOCK position.
3. Move the headlamp switch to the PARK or the HEAD position.

The chime will sound 150 beats per minute while the following conditions exist:

6

Lights On Chime

1. Close the driver's door.
2. Turn the ignition switch to the LOCK position.
3. Move the headlamp switch to the PARK or the HEAD position.
4. Move the headlamp switch to the OFF position.

The chime stops sounding when the headlamp switch is moved to the OFF position.

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.