Step | Action | Value(s) | Yes | No | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Were you sent here from the HUD Diagnostic System Check? | -- | ||||||||||||
2 |
Do all segments of the head-up display illuminate for 3.5 seconds? | -- | ||||||||||||
3 | Press and release the PAGE button to scroll through the following head-up display modes:
Does the head-up display mode change? | -- | ||||||||||||
4 |
Does the head-up display image change each time the jumper is applied? | -- | ||||||||||||
5 |
Does the head-up display image change? | -- | System OK | |||||||||||
6 | Check the head-up display switch harness and connector for an open or short between the head-up display switch and the IPC. Was a problem found and repaired? | -- | ||||||||||||
7 | Check the head-up display unit harness pigtail and connector for an open or short between the head-up display unit and the IPC. Was a problem found and repaired? | -- | ||||||||||||
8 | Check the head-up display switch harness and connector for an open or short between the head-up display switch and the IPC. Was a problem found and repaired? | -- | ||||||||||||
9 | Replace the head-up display switch. Refer to Head Up Display Switch Replacement . Is the replacement complete? | -- | -- | |||||||||||
10 | Replace the head-up display unit. Refer to Instrument Cluster Head Up Display Replacement . Is the replacement complete? | -- | -- | |||||||||||
11 | Replace the IPC assembly. Refer to Instrument Cluster Replacement . Is the replacement complete? | -- | -- | |||||||||||
12 |
Is the repair complete? | -- | -- |
