1

1. Turn the ignition switch to the ON position.
2. Using a scan tool, establish communications with the Instrument Panel Cluster (IPC)

Diagnostic System Check - Instrument Cluster

2

1. Turn the ignition switch to the OFF position.
2. Turn the ignition switch to the ON position.

The instrument panel cluster will perform a indicator bulb check and a sweep test (minimum to maximum) on all gauges.

3

1. Turn the ignition switch to the OFF position.
2. Set the instrument cluster head-up display (HUD) dimmer switch to the MAX position.
3. Turn the ignition switch to the ON position.

All of the segments of the Head-up display (HUD) will illuminate for approximately 3.5 seconds.

Head Up Display (HUD) Inoperative

4

1. Press the HUD DISPLAY button to the UP position.
2. Press the HUD DISPLAY button to the DOWN position.

The HUD image moves UP when the DISPLAY button is pressed UP, and moves DOWN when the DISPLAY button is pressed DOWN.

Head Up Display (HUD) Image Height Adjustment Inoperative

5

1. Move the HUD dimmer switch to the OFF position.
2. Move the HUD dimmer switch to HIGH position.

Head Up Display (HUD) Image Does Not Dim

6

1. Move the HUD dimmer switch to the HIGH position.
2. Cover the ambient light sensor located on the HUD display unit with a dark fabric.
3. Wait 5 seconds.

The HUD image dims with the ambient light sensor covered.

Head Up Display (HUD) Image Does Not Dim

7

Press and hold the HUD PAGE button to scroll through the different HUD display modes.

8

1. Press and hold the HUD PAGE button to scroll through the different HUD displays until Speedometer and gauges or Speedometer, Tachometer and gauges is displayed.
2. Press and release the HUD PAGE button to scroll through the different HUD gauge display modes.

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.