Step | Action | Value(s) | Yes | No | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DEFINITION: Head-up display does not change display modes when the PAGE button is pressed. | ||||||||||||||
1 | Were you sent here from the IPC Diagnostic System Check? | -- | ||||||||||||
2 |
Do all segments of the head-up display illuminate for 3.5 seconds? | -- | ||||||||||||
3 | Press and release the PAGE button to scroll through the following head-up display modes:
Does the head-up display mode change? | -- | System OK | |||||||||||
4 | Inspect for poor connections at the harness connector of the head-up display switch and IPC. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs Did you find and correct the condition? | -- | ||||||||||||
5 | Inspect for poor connections at the harness connector of the head-up display . Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs Did you find and correct the condition? | -- | ||||||||||||
6 | Test the head-up display switch circuit for a short to ground, short to voltage, or an open. Refer to Circuit Testing and Wiring Repairs Did you find and correct the condition? | -- | ||||||||||||
7 | Replace the head-up display switch. Refer to Head Up Display Switch Replacement . Did you find and correct the condition? | -- | ||||||||||||
8 | Replace the head-up display . Refer to Instrument Cluster Head Up Display Replacement . Did you find and correct the condition? | -- | ||||||||||||
9 | Replace the IPC assembly. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | -- | |||||||||||
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | |||||||||||
