GM Service Manual Online
For 1990-2009 cars only

Front Seat Adjuster Replacement VIN Plant Code 6

Removal Procedure


    Object Number: 819991  Size: SH
  1. Remove the front bucket seat. Refer to Seat Replacement .
  2. Remove the seat adjuster return springs from the adjusters, if equipped with manual seat.
  3. Remove the seat belt buckle bolt.
  4. Remove the seat belt buckle.

  5. For 6-way adjuster remove the motor support bracket. Refer to Front Seat Adjuster Motor Replacement .

Installation Procedure


    Object Number: 819991  Size: SH
  1. Install the inner and outer seat adjusters (4) to the seat cushion frame (3).
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the inner and outer seat adjuster bolts (5).
  4. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  5. Install the seat belt buckle.
  6. Install the seat belt buckle bolt.

    Tighten
    Tighten the bolt to 42 N·m (31 lb ft)

  7. For 6-way adjuster install the motor support bracket. Refer to Front Seat Adjuster Motor Replacement .
  8. Install the seat adjuster return springs to the adjusters, if equipped with manual seat.
  9. Install the front bucket seat. Refer to Seat Replacement .

Front Seat Adjuster Replacement VIN Plant Code C, M

Removal Procedure

  1. Remove the front bucket seat. Refer to Seat Replacement .
  2. Remove the seat cushion cover and the cushion as one piece. Refer to Front Seat Cushion Cover Replacement .

  3. Object Number: 740584  Size: SH
  4. Remove the seat adjuster bolts from the seat cushion frame.
  5. Remove the electrical wire harness from the seat cushion frame, if required.

  6. Object Number: 740579  Size: SH
  7. Remove the seat adjuster from the seat cushion frame.
  8. Remove the seat belt buckle bolt.
  9. Remove the seat belt buckle.


    Object Number: 763287  Size: SH
  10. For the 2-way or 4-way adjuster, perform the following steps if required:
  11. • Remove the seat adjuster return springs (1, 3).
    • Remove the seat adjuster linkage wire (4).
    • Drill out the rivet (5) for the electrical wire harness bracket.
    • Remove the bracket from the seat adjuster.
    • Remove the seat adjuster 2-way handle retaining clip, if equipped.
    •  Remove the 2-way handle from the seat adjusters.
    • Disconnect the electrical wire harness (2) from the adjuster motor, if equipped.
  12. For the 6-way adjuster remove the motor support bracket. Refer to Front Seat Adjuster Motor Replacement .

Installation Procedure


    Object Number: 763287  Size: SH
  1. For the 2-way or the 4-way adjuster, perform the following steps if required:
  2. • Connect the electrical wire harness (2) to the adjuster motor.
    • Install the 2-way handle to the seat adjusters, if equipped.
    •  Install the seat adjuster 2-way handle retaining clip.
    • Attach the electrical wire harness bracket to the seat adjuster. Install a rivet (5) to the electrical wire harness bracket, and rivet the bracket to the seat adjuster with a rivet gun.
    • Install the seat adjuster linkage wire (4).
    • Install the seat adjuster return springs (1, 3).
  3. For the 6-way adjuster install the motor support bracket. Refer to Front Seat Adjuster Motor Replacement .

  4. Object Number: 740579  Size: SH
  5. Install the seat belt buckle.
  6. Install the seat belt buckle bolt.
  7. Tighten
    Tighten the bolt to 42 N·m (31 lb ft).

  8. Position the seat adjuster to the seat cushion frame.

  9. Object Number: 740579  Size: SH
  10. Position the seat adjuster to the seat cushion frame.

  11. Object Number: 740584  Size: SH
  12. Install the seat adjuster bolts to the seat cushion frame.
  13. Tighten
    Tighten the bolts to 24 N·m (18 lb ft).

  14. Install electrical wire harness to the seat cushion frame if required.
  15. Install the seat cushion cover and the cushion as one piece. Refer to Front Seat Cushion Cover Replacement .
  16. Install the front bucket seat. Refer to Seat Replacement .