Was the Starting System Check performed?

--

Go to Step 2

Go to Starting System Check

1. Connect a digital multimeter across the battery terminals.
2. Measure the voltage while cranking the engine.

Is the voltage greater than or equal to the specified value?

9.6 V

Go to Step 3

Go to Battery Load Test

1. Connect a digital multimeter between the negative (-) battery terminal and the engine block.
2. Measure the voltage while cranking the engine.

Is the voltage less than the specified value?

0.5 V

Go to Step 5

Go to Step 4

Replace the negative (-) battery cable. Refer to Battery Cable Replacement .

Is the repair complete?

--

Go to Starting System Check

--

1. Connect a digital multimeter between the positive (+) battery terminal and the starter solenoid terminal B.
2. Measure the voltage while cranking the engine.

Is the voltage less than the specified value?

0.5 V

Go to Step 6

Go to Step 7

Repair or replace the starter motor. Refer to Starter Motor Replacement and Starter Motor Overhaul .

Is the repair complete?

--

Go to Starting System Check

--

Replace the positive (+) battery cable. Refer to Battery Cable Replacement .

Is the repair complete?

--

Go to Starting System Check

--