Removal Procedure
- Remove the instrument panel (IP). Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gauges,
and Console.
- Remove the following components
from the instrument panel:
• | The defroster nozzle (13) |
• | The left demister ducts (16) |
• | The right demister ducts (4) |
- Remove the 1 screw and the 3-piece center vent duct (14)
as an assembly from the instrument panel.
- Disassemble the left (15) and the right (5) vent ducts from the
center vent duct (if necessary).
Installation Procedure
- Assemble the left and
right vent ducts to the center vent duct (if necessary).
- Install the center vent duct assembly to the IP.
Secure the assembly with the 1 screw.
- Install the following components to the IP:
Secure the components with the 3 screws.
• | The defroster nozzle (13) |
• | The left side demister duct (16) |
• | The right side demister duct (4) |
- Install the IP. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gauges, and Console.