GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the HVAC Compressor Controls System Check performed?

--

Go to Step 2

Go to HVAC Compressor Controls System Check

2

  1. Start the engine.
  2. Move the blower speed selector switch to any position except the OFF position.
  3. Turn the air conditioning (A/C) switch to the ON position.

Does the A/C compressor clutch engage?

--

Go to Step 3

Go to HVAC Compressor Clutch Does Not Engage

3

Backprobe the A/C condenser fan motor connector with a test lamp from terminal 2 to ground.

Does the test lamp light?

--

Go to Step 4

Go to Step 7

4

Test for an open in the BLK wire between the A/C condenser fan motor and G103.

Was an open found?

--

Go to Step 5

Go to Step 6

5

Repair the open in the BLK wire between the A/C condenser fan motor and G102. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to HVAC Compressor Controls System Check

--

6

Replace the A/C condenser fan motor. Refer to Condenser Replacement .

Is the repair complete?

--

Go to HVAC Compressor Controls System Check

--

7

  1. Remove the relay box from the wheelhousing.
  2. Backprobe the A/C 2 condenser fan relay with a test lamp from terminal 3 to ground.

Does the test lamp light?

--

Go to Step 8

Go to Step 9

8

Repair the open in the BLU/BLK wire or the RED/BLU wire between the A/C 2 condenser fan relay and the A/C condenser fan motor. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to HVAC Compressor Controls System Check

--

9

Backprobe the A/C 2 condenser fan relay with a test lamp from terminal 4 to ground.

Does the test lamp light?

--

Go to Step 11

Go to Step 10

10

Repair the open in the RED/WHT wire between S122 and the A/C 2 condenser fan relay. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to HVAC Compressor Controls System Check

--

11

Backprobe the A/C 2 condenser fan relay with a test lamp from terminal 2 to B+.

Does the test lamp light?

--

Go to Step 13

Go to Step 12

12

Repair the open in the BLK wire between the A/C 2 condenser fan relay and G102. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to HVAC Compressor Controls System Check

--

13

Test for an open in the BLK/RED wire between S123 and the A/C 2 condenser fan relay.

Was an open found?

--

Go to Step 14

Go to Step 15

14

Repair the open in the BLK/RED wire between S123 and the A/C 2 condenser fan relay. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to HVAC Compressor Controls System Check

--

15

Replace the A/C 2 condenser fan relay. Refer to Condenser Fan Relay Replacement .

Is the repair complete?

--

Go to HVAC Compressor Controls System Check

--