GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Metro 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 Receiver Dehydrator Tube Replacement - Inlet

Removal Procedure

    Object Number: 354735 Size: MH
  1. Discharge and recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  2. Disconnect the pipe fitting at the condenser outlet.
  3. Remove the bolt and the receiver/dryer inlet pipe (4) from the receiver/dryer.

Installation Procedure

    Object Number: 354735 Size: MH
  1. Coat new O-rings with mineral base 525 viscosity refrigerant oil.
  2. Install the O-rings to the receiver/dryer inlet pipe (4).
  3. Install the receiver/dryer inlet pipe to the receiver/dryer. Secure with the bolt.
  4. Connect the pipe fitting at the condenser outlet.
  5. Evacuate and recharge the air conditioning (A/C) system. Refer to Refrigerant Recovery and Recharging .
  6. Operate the A/C system and inspect for refrigerant leaks. Refer to Leak Testing .