Was the wiper/washer system check performed?

--

Go to Step 2

Go to Wiper/Washer System Check

1. Turn the ignition switch to the ON position.
2. Move the front wiper/washer lever to the LO position.
3. Backprobe the front wiper motor connector using J 35616-200 from cavity 2 to ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the combination switch. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in Restraints.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

Replace the front wiper motor. Refer to Windshield Wiper Motor Replacement .

Is the repair complete?

--

Go to Wiper/Washer System Check

--