GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Metro 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Mode Control Cable Replacement

Removal Procedure

    Object Number: 354232 Size: SH

    Important: Note the routing position of the cable in order to ensure easy installation.

  1. Disconnect the mode control cable (2) at the heater case (1).
  2. Remove the heater control unit (5). Refer to Control Assembly Replacement .
  3. Disconnect the mode control cable at the heater control unit.
  4. Remove the mode control cable from the instrument panel (IP).

Installation Procedure
  1. Position the mode control cable in the vehicle. Route the cable as previously noted.

    2. Object Number: 354232 Size: SH
  2. Connect the mode control cable (2) to the heater control unit (5).
  3. Install the heater control unit to the IP. Refer to Control Assembly Replacement .
  4. Connect the mode control cable to the heater case (1).
  5. Adjust the mode control cable. Refer to Mode Control Cable Adjustment .