For 1990-2009 cars only
Removal Procedure
- Remove the rear door window. Refer to Rear Side Door Window Replacement .
- Remove the 6 mounting screws (1) that retain the regulator.
- Slide the window regulator through the large opening in the door panel.
- Inspect the gear and the spring for wear and damage.
Installation Procedure
- Apply a multipurpose grease to all lubrication and sliding points on the regulator (1), as indicated by the arrows.
- Install the window regulator to the door. Secure the regulator with 6 mounting screws (1).
- Install the rear door window. Refer to Rear Side Door Window Replacement .
