GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Metro 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Latch Striker Replacement

Removal Procedure
  1. Fold back the following components:
    2. • The carpet
    • The spare tire cover
  2. Remove the following components from the vehicle:
    3. • 9 plastic retaining clips
    • The rear end interior trim panel (5)

    Object Number: 350635 Size: MH
  3. Disconnect the lamp switch electrical connector.
  4. Remove the lock striker cover from the lock striker.
  5. Disconnect the rear compartment lid release cable from the lock striker, if equipped.
  6. Remove the screw and the lamp switch from the lock striker, if equipped.

    7. Object Number: 350638 Size: SH
  7. Remove 2 bolts and the lock striker (2) from the vehicle.

Installation Procedure

    Object Number: 350638 Size: SH
  1. Connect the rear compartment lid release cable to the lock striker, if equipped.
  2. Install the lock striker (2) to the vehicle. Secure the lock striker with 2 bolts.

    3. Object Number: 350635 Size: MH
  3. Install the rear compartment lid lamp switch to the lock striker (6), if equipped. Secure the lamp switch with 1 screw.
  4. Connect the lamp switch electrical connector.
  5. Install the rear end interior trim panel (5). Secure the trim panel with 9 plastic retaining clips.
  6. Reposition the following components:
    7. • The spare tire cover
    • The carpet

    Object Number: 350638 Size: SH
  7. Adjust the lock striker (2) by performing the following steps:
    8. 7.1. Loosen the 2 bolts.
    7.2. Properly align the lock striker (2) by moving the striker in the following directions as needed:
       • Left
       • Right
       • Forward
       • Rearward
  8. Refer to Body Rear End Adjustment Specifications .
  9. Install the lock striker cover to the lock striker.