Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Wiper/Washer Rear System Check? | -- | Go to Step 2 | |
2 |
Did the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Backprobe the rear wiper/washer switch connector with a J 35616-200 unpowered test lamp from cavity 1 to ground. Did the test lamp light? | -- | Go to Step 6 | Go to Step 5 |
4 | Repair the open in the YEL/BLU wire between fuse block 2 and the rear wiper/washer switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
5 | Replace the rear wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement . Is the repair complete? | -- | -- | |
6 | Backprobe the rear wiper motor connector with a test lamp from cavity 4 to ground. Did the test lamp light? | -- | Go to Step 7 | Go to Step 8 |
7 | Replace the rear wiper motor. Refer to Rear Window Wiper Motor Replacement . Is the repair complete? | -- | -- | |
8 | Repair the open in the ORN wire between the rear wiper/washer switch and the rear wiper motor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
