Did you perform the Radio/Audio System Check?

--

Go to Step 2

Go to Radio/Audio System Check

1. Turn the ignition switch to the OFF position.
2. Disconnect the suspect speaker connector.
3. Connect a digital multimeter across the terminals of the suspect speaker.
4. Measure the resistance.

Is the resistance within the specified range?

4-10 ohms

Go to Step 4

Go to Step 3

Replace the speaker.

Is the repair complete?

--

Go to Radio/Audio System Check

--

1. Disconnect the radio connector.
2. Connect a digital multimeter from the speaker connector cavity 1 to ground.

Is the resistance equal to the specified value?

Infinite

Go to Step 6

Go to Step 5

Repair the short to ground in the suspect wire.

Is the repair complete?

--

Go to Radio/Audio System Check

--

Connect a digital multimeter from the speaker connector cavity 2 to ground.

Is the resistance equal to the specified value?

Infinite

Go to Step 8

Go to Step 7

Repair the short to ground in the suspect wire.

Is the repair complete?

--

Go to Radio/Audio System Check

--

1. Reconnect the speaker.
2. Connect a digital multimeter across the radio connector cavities of the suspect speaker.

Is the resistance within the specified range?

4-15 ohms

Go to Step 9

Go to Step 10

1. Inspect for poor connections at the radio or the speaker.
2. If the connections are OK, remove the radio for repair.

Is the repair complete?

--

Go to Radio/Audio System Check

--

Inspect for poor connections at the following components:

1. The speaker
2. The in-line connectors
3. The open in the speaker feed circuits.

Is the repair complete?

--

Go to Radio/Audio System Check

--