Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Definition: This table diagnoses a right rear window inoperative condition when using the remote right rear window switch located in the center console. | ||||
1 | Did you perform the Power Windows System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 7 |
3 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 16 |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 21 |
5 | Connect a J 35616-200 unpowered test lamp from the right rear power window motor connector cavity 1 to B+. Does the test lamp light? | -- | Go to Step 6 | Go to Step 26 |
6 | Replace the right rear power window motor. Refer to Rear Side Door Window Regulator Replacement . Is the repair complete? | -- | -- | |
7 |
Does the test lamp light? | -- | Go to Step 8 | Go to Step 9 |
8 | Repair the open in the RED wire between the right rear power window switch and the right rear power window motor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
9 |
Does the test lamp light? | -- | Go to Step 10 | Go to Step 11 |
10 | Replace the right rear power window switch. Refer to Rear Side Door Window Switch Replacement . Is the repair complete? | -- | -- | |
11 |
Does the test lamp light? | -- | Go to Step 12 | Go to Step 13 |
12 | Repair the open in the RED/WHT or the RED/BLK wire between the right rear remote power window switch and the right rear power window switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
13 | Use a J 35616-200 unpowered test lamp in order to backprobe the right rear remote power window switch connector from cavity 1 to ground. Does the test lamp light? | -- | Go to Step 14 | Go to Step 15 |
14 | Replace the right rear remote power window switch. Is the repair complete? | -- | -- | |
15 | Repair the open in the BLU/WHT wire between the right rear remote power window switch and SP370. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
16 |
Does the test lamp light? | -- | Go to Step 17 | Go to Step 18 |
17 | Repair the open in the YEL wire between the right rear power window switch and the right rear power window motor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
18 |
Does the test lamp light? | -- | Go to Step 10 | Go to Step 19 |
19 |
Does the test lamp light? | -- | Go to Step 20 | Go to Step 13 |
20 | Repair the open in the GRN/WHT or the GRN/BLK wire between the right rear remote power window switch and the right rear power window switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
21 | Use a J 35616-200 unpowered test lamp in order to backprobe the right rear power window switch connector from cavity 5 to B+. Does the test lamp light? | -- | Go to Step 8 | Go to Step 22 |
22 | Use a J 35616-200 unpowered test lamp in order to backprobe the right rear power window switch connector from cavity 2 to B+. Does the test lamp light? | -- | Go to Step 10 | Go to Step 23 |
23 | Use a J 35616-200 unpowered test lamp in order to backprobe the right rear remote power window switch connector from cavity 5 to B+. Does the test lamp light? | -- | Go to Step 12 | Go to Step 24 |
24 | Use a J 35616-200 unpowered test lamp in order to backprobe the right rear remote power window switch connector from cavity 4 to B+. Does the test lamp light? | -- | Go to Step 14 | Go to Step 25 |
25 | Use a J 35616-200 unpowered test lamp in order to backprobe the right rear power window switch connector from cavity 3 to B+. Does the test lamp light? | -- | Go to Step 17 | Go to Step 26 |
26 | Use a J 35616-200 unpowered test lamp in order to backprobe the right rear power window switch connector from cavity 4 to B+. Does the test lamp light? | -- | Go to Step 10 | Go to Step 27 |
27 | Use a J 35616-200 unpowered test lamp from the right rear remote power window switch connector from cavity 3 to B+. Does the test lamp light? | -- | Go to Step 20 | Go to Step 28 |
28 | Use a J 35616-200 unpowered test lamp in order to backprobe the right rear remote power window switch connector from cavity 2 to B+. Does the test lamp light? | -- | Go to Step 14 | Go to Step 29 |
29 | Use a J 35616-200 unpowered test lamp in order to backprobe the left front power window/door lock switch connector from cavity 5 to B+. Does the test lamp light? | -- | Go to Step 30 | Go to Step 31 |
30 | Repair the open in the BRN or the BRN/BLK wire between the left front power window/door lock switch and SP371 or in the BRN/BLK wire between SP371 and the left rear remote power window switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
31 | Replace the left front power window/door lock switch. Refer to Door Lock and Side Window Switch Replacement . Is the repair complete? | -- | -- | |
