Removal Procedure
- Remove the front side door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Remove the screws and
the door trim support bracket from the door.
- Peel the water deflector (1) away from the door.
- Remove
the door outside handle rod (5) from the door lock (2).
- Remove the door inside handle rod from the door lock (2).
- Remove the door lock cylinder
lock rod (6)
from the door lock actuator (5).
- Remove the front side door lock knob lock rod (3) from
the door lock actuator (5).
- Disconnect the door lock actuator (5) electrical connector.
- Remove the 4 door lock actuator screws.
- Remove the door lock actuator (5) from the door.
Installation Procedure
- Install the door lock
actuator (5) to the door. Secure the door lock actuator with the 4 screws.
- Install the door lock knob lock rod (3) to the door lock
actuator (5).
- Install the door lock cylinder lock rod (6) to the door
lock actuator (5).
- Install the door outside handle rod (5) to the door lock actuator
(2).
- Install the door inside handle rod to the door lock actuator (2).
- Adjust the outside handle rod to door lock linkage distance (4)
to 0-2 mm (0.0-0.08 inch).
- Inspect for tears and
holes in the water deflector (1).
- Use waterproof tape in order to repair both sides of the water
deflector (1), as needed.
- Apply adhesive (2) to the back of the water deflector (1).
- Install the water deflector (1) to the door.
- Install the door trim support bracket to the door. Secure the
bracket with the screws.
- Install the front side door trim panel. Refer to
Front Side Door Trim Panel Replacement
.