Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
1 |
Does the fasten belts chime stop? | -- | Go to Step 2 | Go to Step 3 | ||||
2 | Replace the seat belt switch. Refer to Seat Belt Side Buckle Replacement - Driver in Seat Belts. Did you complete the repair? | -- | -- | |||||
3 |
Does the fasten belts chime stop? | -- | Go to Step 4 | Go to Step 5 | ||||
4 | Repair the short to ground in CKT 238 between terminal A of the seat belt switch connector and terminal B12 of the right IP wiring harness junction block connector C3. Did you complete the repair? | -- | -- | |||||
5 |
Does the fasten belts chime stop? | -- | Go to Step 6 | Go to Step 7 | ||||
6 | Replace the right IP wiring harness junction block. Refer to Relay/Fuse Center Replacement in Wiring Systems. Did you complete the repair? | -- | -- | |||||
7 |
Does the fasten belts chime stop? | -- | Go to Step 8 | Go to Step 9 | ||||
8 | Replace the SDM. Refer to Inflatable Restraint Sensing and Diagnostic Module Replacement in SIR. Did you complete the repair? | -- | -- | |||||
9 |
Does the resistance measure within the specified range? | 0-2 ohms | Go to Step 10 | Go to Step 11 | ||||
10 | Replace the BCM. Refer to the following procedures:
Did you complete the repair? | -- | -- | |||||
11 | Repair the short to ground in CKT 238 between terminal B11 of BCM connector C2 and terminal 8 of the SDM connector. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- |
