Removal Procedure
- Open the rear compartment lid.
- Disconnect the electrical connector.
- Remove the 2 push-in retainers (1) that secure the RFA
module (3) to the bottom of the package shelf.
- Remove the RFA module.
Installation Procedure
- Align the RFA module to the rear shelf.
- Install the retainers for the RFA module (3) onto the package
shelf.
- Connect the electrical connector.
- Close the rear compartment lid.
- Program the transmitters. Refer to
Transmitter Programming
.
- Program options for RFA module. Refer to
Remote Control Door Lock Reprogramming
.