Removal Procedure
- Remove the outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
- Remove the window weatherstrip retainer. Refer to Rear Side Door Window Channel Retainer Replacement .
- Remove the stationary window molding mounting screws.
- Use fingertips in order to slide the molding rearward at the bend in order to release the molding.
- Pull the molding away from the stationary window module.
- Remove the stationary window molding from the door.
Some back and forth movement may be needed in order to release the molding mounting pins from the door stationary window module.
Installation Procedure
- Install the stationary window to the door.
- Align the stationary window molding mounting pins with the retainers on the stationary window module.
- Push the stationary window molding towards the window in order to secure the retainers.
- Install the stationary window molding mounting screws.
- Install the window weatherstrip retainer. Refer to Rear Side Door Window Channel Retainer Replacement .
- Install the outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the door stationary window molding screws to 2 N·m
(18 lb in).
