GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Century 🢒 Body and Accessories 🢒 Cruise Control 🢒 Diagnostic System Check - Cruise Control

Test Description

The number(s) below refer to the step number(s) on the diagnostic table.

  1. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.

    2.

  2. The symptom list in Symptoms will determine the correct diagnostic procedure to use.

Step

Action

Yes

No

1

Install a scan tool.

Does the scan tool power up?

Go to Step 2

Go to Scan Tool Does Not Power Up in Data Link Communications

2

  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communication with the Powertrain Control Module.

Does the scan tool communicate with the Powertrain Control Module?

Go to Step 3

Go to Scan Tool Does Not Communicate with E and C Data Line in Data Link Communications

3

Select the PCM display DTC function on the scan tool.

Does the scan tool display any DTCs?

Go to Powertrain On Board Diagnostic (OBD) System Check 3.1L or Powertrain On Board Diagnostic (OBD) System Check 3.8L

Go to Symptoms