GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .

  3. Object Number: 325967  Size: SH
  4. Remove the armrest bracket screws.
  5. Remove the armrest bracket.

Installation Procedure


    Object Number: 325967  Size: SH
  1. Position the armrest bracket in place.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the armrest bracket screws.
  4. Tighten
    Tighten the screws to 10 N·m (89 lb in).

  5. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  6. Install the trim panel. Refer to Rear Side Door Water Deflector Replacement .