GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Century (China) 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Switch Replacement

Removal Procedure

    Object Number: 467507 Size: SH

    Important: When removing a door trim panel or switch plate, the ignition switch must be in the OFF position. This will eliminate the possibility of shorting out the switch if a flat-bladed tool, awl or metal object is used to remove the switch from the harness.

  1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Press in the switch retainers and remove the switch plate from the door trim.
  3. Disconnect the electrical connector.

Installation Procedure

    Object Number: 467507 Size: SH
  1. Connect the electrical connector.
  2. Press the switch into the door trim pad, pressing in until fully seated.
  3. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .