Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover.

1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .



2. Using the J 38778 remove the push-pin retainers from the rear bumper energy absorber at the rear bumper impact bar.
3. Remove the rear bumper energy absorber from the rear bumper impact bar.

1. Install the rear bumper energy absorber to the rear bumper impact bar.
2. Install the push-pin retainers to the rear bumper energy absorber at the rear bumper impact bar.
3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .