For 1990-2009 cars only
Removal Procedure
- Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
- Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
- Remove the inner sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
- Remove the outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement
- Remove the window.
- Remove the two screws from the front window channel.
- Carefully pull the window weather-strip from the door.
Installation Procedure
- Install the window weather-strip to the door starting in the top corner working out in both directions.
- Firmly seat the window weather-strip to the door.
- Install the two window channel screws.
- Install the door window.
- Install the outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement .
- Install the inner sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
- Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
- Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the window channel screws to 10 N·m (89 lb in).
