GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 LeSabre 🢒 Body and Accessories 🢒 Seats 🢒 Memory Seat Control Module Replacement

Removal Procedure

    Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:

       • Air bag deployment
       • Personal injury
       • Unnecessary SIR system repairs
    In order to avoid the above conditions, observe the following guidelines:
       • Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring.
       • If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System.

  1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  2. Remove front bucket seat. Refer to Front Seat Replacement - Bucket .

    3. Object Number: 295290 Size: SH
  3. Disconnect the electrical connectors.
  4. Drill rivets retaining the memory seat module.
  5. Remove the module from the seat.

Installation Procedure
  1. Position the memory seat module.
  2. Rivet or fasten with self-tapping screws.

    3. Object Number: 295290 Size: SH
  3. Install the electrical connectors.
  4. Install the front bucket seat. Refer to Front Seat Replacement - Bucket .
  5. Enable the SIR system. Refer to Enabling the SIR System in SIR.
  6. Calibrate the seat. Refer to Memory Seat Calibration .