- Remove the upper and lower trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Disconnect the coded key
controller connector.
- Disconnect the fused jumper assembly connector.
- Slide the 2 connectors (2)
of the turn signal and multifunction switch assembly out of the bulk head
connector (1).
- Slide the coded key controller (2)
from the electronic lock module assembly (1).
- Remove the key alarm connector (1)
from the electronic lock module assembly (4).
- Remove the 2 tapping screws (3) from the ignition
and key alarm switch assembly (2).