For 1990-2009 cars only
Removal Procedure
- Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
- Install a 1/2 inch drive breaker to the drive belt tensioner.
- Push down on the breaker bar in order to release the tension.
- Remove the drive belt from the power steering pump.
- Slowly return the tensioner to the original position.
- Remove the belt from the lower pulley and idlers.
- Partially raise the vehicle. Refer to Lifting and Jacking the Vehicle.
Installation Procedure
- Route the drive belt around all the pulleys except for the power steering pump.
- Lower the vehicle.
- Install a 1/2 inch drive breaker bar to the drive belt tensioner.
- Push down on the breaker bar in order to release the tension and route the belt around the power steering pump pulley.
- Slowly return the tensioner to its original position.
- After drive belt installation, inspect the drive belt for the proper routing and correct alignment.
- Install the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
- Start the engine and check for proper belt and accessory operation.
Ensure the belt is seated on all pulleys.
