Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
| Turn the headlamp switch to the PARK position.
| The following components
are all on:
|
|
2
|
- Turn the ignition switch to the RUN position.
- Operate the turn signal switch to the left or the right position.
| The turn
signal lamps and cornering flash continuously on and off.
|
|
3
| Turn the turn signal switch to the OFF position.
| The turn signal and cornering lamps
are off.
| Cornering Lamps are Always On. Refer to
Cornering Lamps Always On
|
4
|
- Turn the Ignition to the OFF position.
- Turn the hazard switch to the ON position.
|
• | The front and rear turn signal lamps flash continuously from minimum
intensity to maximum intensity. |
• | The front marker lamps flash continuously from off to on. |
|
|
5
|
- Turn the hazard switch to the OFF position.
- Depress the brake pedal.
|
The following components are on:
The following components are on at maximum:
• | Center High Mounted Stop Lamp (CHMSL) |
|
|
6
| Release the brake pedal.
|
• | The tail lamps go to low intensity. |
• | The Center High Mounted Stop Lamp turns off. |
| Stop Lamps
Always On. Refer to
Stop Lamps Always On
|
7
| Turn the ignition to the RUN position.
| The Daytime Running Lamps (DRL) turns on.
• | Daylight -- the front turn signal lamps are on (non-flashing). |
• | Low light -- the front turn signal lamps are off, the low
beam headlamps and the park lamps are on. |
| Daytime
Running Lamps (DRL) Inoperative Headlamp Switch Operates Normally Refer to
Daytime Running Lamps (DRL) Inoperative, Headlamp Switch Operates Normally
|
8
|
- Set the park brake.
- Turn the ignition to the RUN position.
| The Daytime
Running Lamps (DRL) are off.
| DRL Inoperative, Headlamp Switch Operates Normally. Refer
to
Daytime Running Lamps (DRL) Inoperative, Headlamp Switch Operates Normally
|