Piston and Connecting Rod Disassemble LDK

Special Tools

For equivalent regional tools, refer to Special Tools.

Warning: Handle the piston carefully. Worn piston rings are sharp and may cause bodily injury.

1. Disassemble the piston rings (1). Use a suitable tool to expand the rings. The piston rings must not be reused.




Note: 2 retainers hold the piston pins in place. No special tools are required to remove the piston pins. Ensure that the piston pin is not damaged. Do not reuse the retainers.

2. Remove the piston pin retainers using the EN-46745 remover  (1) and the EN-46745-4 adapter .



3. Remove the piston pin (1) and connecting rod (3) from the piston (2).

Piston and Connecting Rod Disassemble LTD

EN-46745 Piston Pin Retainer Remover and Installer

For equivalent regional tools, refer to Special Tools.

Warning: Handle the piston carefully. Worn piston rings are sharp and may cause bodily injury.

1. Disassemble the piston rings (1-5). Use a suitable tool to expand the rings. The piston rings must not be reused.




Note: Two retainers hold the piston pins in place. Ensure that the piston pin is not damaged. Do not reuse the retainers.

2. Remove the piston pin retainers using the EN-46745 remover  (1).



3. Remove the piston pin (1) and the connecting rod (3) from the piston (2).