GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

All the floor carpets consist of a molded one-piece carpet over both the front and the rear floor pan. Use the following procedures to remove and replace the carpet:

  1. Remove the front seats. For bucket seats, refer to Front Seat Replacement - Bucket or split bench Split Bench Seat Replacement in Seats.

  2. Object Number: 305160  Size: SH
  3. Remove the center console if equipped. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.
  4. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  5. Remove the carpet retainers. Refer to Carpet Retainer Replacement .
  6. Remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
  7. Remove the quarter trim. Refer to Rear Quarter Lower Trim Panel Replacement .
  8. Remove the carpet from the vehicle.

Installation Procedure


    Object Number: 305160  Size: SH
  1. Install the carpet
  2. Install the quarter trim. Refer to Rear Quarter Lower Trim Panel Replacement .
  3. Install the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
  4. Install the carpet retainers. Refer to Carpet Retainer Replacement .
  5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  6. Install the center console if equipped. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.
  7. Install the front seats. For bucket seats, refer to Front Seat Replacement - Bucket or split bench Split Bench Seat Replacement in Seats.