Preliminary Procedure

Remove the headlamp capsule. Refer to Headlamp Capsule Replacement.

1

Accessory Cap Screw (Qty: 3)

Tip
Hand tighten only, the accessory cap screws.

2

Accessory Cap

Tip
Inspect and ensure the accessory cap seal is properly seated prior to installing the accessory cap cover.

3

Turn Signal Lamp Bulb

Warning: Refer to Halogen Bulb Warning in the Preface section.

Procedure

1. Pinch the tabs on the bulb socket and pull the bulb socket from the headlamp assembly.
2. Disconnect the electrical connector from the bulb socket.
3. Remove and replace the bulb.

4

Park Signal Lamp Bulb

Procedure

1. Pinch the tabs on the bulb socket and pull the bulb socket from the headlamp assembly.
2. Disconnect the electrical connector from the bulb socket.
3. Remove and replace the bulb.