Warning: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

Warning: The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:

Preliminary Procedure

1. Open and support the hood.
2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
3. Disconnect the headlamp electrical connector at the base of the headlamp assembly.

1

Headlamp Capsule Assembly Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

2

Headlamp Capsule Assembly Nut

Tighten
6 N·m (53 lb in)

3

Headlamp Capsule Assembly

Tip
Carefully move the headlamp capsule assembly upward and outward in order to remove.