Preliminary Procedure

1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.
2. Place the rear bumper fascia on a clean protected surface prior to servicing the rear fog lamps.

1

Rear Fascia Insert Retainer (Qty: 4)

Procedure

1. Release only two retainers from one lamp assembly if only servicing one lamp.
2. Rotate the fog lamp from the retainer tabs on the rear bumper fascia insert in order to remove.

2

Fog Lamp Bracket Screw (Qty 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 

Remove only two screws if servicing one lamp assembly.

3

Rear Fog Lamp Bracket

4

Rear Fog Lamp Assembly